The SCG353A051 combines a solenoid pilot and a dual-stage diaphragm valve in one assembly. The controller connects to the pilot on the valve, so the cleaning signal reaches the valve electrically. The G2½ threaded body routes compressed air from the header into the blowpipe.
| Feature | SCG353A051 |
|---|---|
| Pipe connections | G2½ threaded (ISO 228/1) |
| Main orifice | 66 mm |
| Flow coefficient | Kv 92 m³/h |
| Function | 2/2 normally closed |
| Actuation | Dual-stage diaphragm with integral solenoid pilot |
| Body | Aluminum |
When the controller energizes the solenoid, the pilot vents the control chamber. The diaphragm stages open the main air path and send a brief pulse down the blowpipe to loosen dust on the filter bags. When the signal ends, the pilot closes and the main passage seals again.
The SCG353A051 has a solenoid pilot on the valve body. The electrical controller switches that pilot directly.
G2½ identifies the pipe connection thread. The 66 mm value describes the valve’s main orifice.
The base model identifies the valve size. Please check your current coil label to identify the required voltage.